Print Page | Close Window

530t windows

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=20871
Printed Date: April 28, 2024 at 4:35 AM


Topic: 530t windows

Posted By: quixs1lver
Subject: 530t windows
Date Posted: November 01, 2003 at 11:12 PM

when i push my arm button. the windows roll up like an inch the stop. then starts to roll all the way up is that normal?




Replies:

Posted By: metz35
Date Posted: November 05, 2003 at 6:18 PM
no not normal...i had that happen to me ...bad module...inproper install....turn up the resistance...i did all these now it works...i cant tell you what fixed though sorry



Posted By: quixs1lver
Date Posted: November 24, 2003 at 12:09 AM

how would you leave your windows down when you arm you car?

when i arm my alarm python 3000esp

it rolls the windows like an inch then stops then rolls it all they way up

i read some post on how to leave the windows to vent...

but when i pust my channel 4 output it vents however when i arm my alarm less then 5 seconds later it will roll my windows up.




Posted By: sroth140
Date Posted: November 24, 2003 at 2:25 AM
call dei


Print Page | Close Window