I'm putting in a autopage 750-lcd alarm into my s2000 and everything work fine expect for the door lock. It wouldn't lock or unlock. I follow the diagram on techsoft and saw that the pol on the S2000 is a C. I don't understand what the mean but i guess that's why it isn't working. Do anybody know how to get it working? This is what I follow.
POWER LOCK|pink/black |C |keyless entry module *2 |
POWER UNLOCK|yel/grn & pnk/blu |C |keyless entry module *2 |
*2 The keyless entry module is located in the drivers kick behind the start button.
That's the module. do you have a power door lock switch? I did one when it was the first release. On the keyless entry module there were two block wire slot. Those slot are one for lock and one for unlock. those were negative trigger. Insert a wire on it.
Good luck.
10nesne1 wrote:
That's the module. do you have a power door lock switch? I did one when it was the first release. On the keyless entry module there were two block wire slot. Those slot are one for lock and one for unlock. those were negative trigger. Insert a wire on it.
Good luck.
the car has no power door lock switch. It's keyless entry. I try tapping into the wire that was given to me by techsoft but I couldn't get it to lock or unlock still. Where are the two block wire slot that you are refering to?
well, if you know where the keyless entry module is then you should remove the 10mm screw and bring it down and you should be able to see there were two blank slot for wire. S2000 model 2000 to 2002 is the same. S2000 model 2003 might be a bite different.
Good luck