Print Page | Close Window

Adding actuator to subaru door lock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21034
Printed Date: May 14, 2025 at 8:17 PM


Topic: Adding actuator to subaru door lock

Posted By: ldollahan
Subject: Adding actuator to subaru door lock
Date Posted: November 05, 2003 at 11:40 AM

I have a remote start/keyless entry for my 91 Legacy. The remote start is hooked up & working fine & I want to hook up the actuator for the door lock. I have the actuator, relay, & wiring diagram, but I need some info on physically installing the actuator. Any diagrams or instructions would be helpful.



Replies:

Posted By: brivalen
Date Posted: November 05, 2003 at 12:58 PM
most likely you will just have to eye it up - open the door panel, find a place for the actuator so that the window will go up and down and the door panel will go back on also and your all set



Posted By: ldollahan
Date Posted: November 05, 2003 at 1:02 PM
Ok, thanks. I didn't know if it would be that simple or not. I'll just have to give it a try! posted_image


Print Page | Close Window