Wiring for ’01 C1500 / ’03 Intrepid

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21093
Printed Date: June 15, 2024 at 12:07 PM

Topic: Wiring for ’01 C1500 / ’03 Intrepid

Posted By: 97titan
Subject: Wiring for ’01 C1500 / ’03 Intrepid
Date Posted: November 06, 2003 at 2:53 PM

I have bought an aftermarket alarm for my 2001 Chevy C1500. It only has remote start and keyless entry. I also have bought an Alarm, remote start and keyless entry for my 2003 Dodge Intrepid. My problem is that they sent instructions for the wires on the alarm but nothing for my vehicles. Is there a place to find this information. Such info needed is what color wire does what, (in my vehicles) so that I know where to tie each wire from the alarm. Any help would be great.

Thanks,

97Titan

Replies:

Posted By: 97titan
Date Posted: November 06, 2003 at 3:31 PM

I have been reading some other messages within this forum and see I may need to give more info. I am about to install my first alarms in these 2 vehicles. The '03 Dodge Intreped SE has no alarm istalled from the factory. So this should be pretty basic???? My '01 Chevy Silverado has the factory keyless entry and panic only installed. Is there something I need to do to this during the install of my new equipment. The new alarm equipment being installed is from Accele. Thanks in advance for any and all help.

Print Page | Close Window