ford pats system
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21145
Printed Date: June 04, 2024 at 4:43 AM
Topic: ford pats system
Posted By: ricetech
Subject: ford pats system
Date Posted: November 08, 2003 at 12:33 AM
hey i have a 2000 mustang, and i am trying to put a remote start alarm on it. i purchased the dei 555f module to bypass the pats system but i have been trying for over an hour and the stupid thing wont start. does anyone know of a way to just rip the damn thing out??
thanks
Replies:
Posted By: Velocity Motors
Date Posted: November 08, 2003 at 12:43 AM
Do you have two working keys to program the unit ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: ricetech
Date Posted: November 08, 2003 at 12:52 AM
i do have two working keys but i did not hear anything about using 2 keys to program it. when i went to my local shop i talked to the head installer and all he said was to get it as close to the ring as possible. another funny thing is that when i put the unit in certian places on the ring then turn the key my theft light starts blinking. then i move the unit away from that spot and try again all goes back to normal. am i doing totally wrong?? i havent had any experiance with this anti theft crap. thanks for the help!!!!!!!
Posted By: mustangpony69
Date Posted: November 08, 2003 at 6:21 AM
try usink the bypass kit from bypasskit.com .I use these kits al of the time and they work perfectly!
|