Print Page | Close Window

how do i program a 555f

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21148
Printed Date: August 19, 2025 at 9:06 AM


Topic: how do i program a 555f

Posted By: ricetech
Subject: how do i program a 555f
Date Posted: November 08, 2003 at 2:06 AM

ok i am putting in a rs on my 2000 mustang. i got the dei 555f and the thing is not working. i talked to a local install shop, and all they said to do was to put the thing on the ring surrounding the ignition switch and turn the ignition on to program it. then i keep hearing i need two keys to program it. i am totally lost here HELP!!!!!!!!!!!! thanks



Replies:

Posted By: mustangpony69
Date Posted: November 08, 2003 at 5:50 AM
the ring is very sesetive to where you place it! The reason you were told to use both keys was that some keys learn and some keys don't. make shure all connections are soldered!I think you have to try remote starting the vehicle with the key in the igniton fot the 555f to learn.




Posted By: Haku
Date Posted: November 08, 2003 at 8:29 AM

You do need both keys to program the 555f.  Here is how you do it.  Put first key in, turn to run (not start), theft light comes on, goes out, turn key off,  Wthin five seconds insert second key, turn to run (not start), theft light goes on, goes out, turn key off.  Request a remote start, make sure all of your connections are done.  And whallllaaa, your done.



-------------
Hak

Siemens Autostart




Posted By: ricetech
Date Posted: November 08, 2003 at 2:27 PM
Ha Ha you guys kick azz!!!!!   Haku: thanks man, worked first try!




Posted By: Haku
Date Posted: November 08, 2003 at 3:29 PM
No problem...

-------------
Hak

Siemens Autostart





Print Page | Close Window