1994 Honda window question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21209
Printed Date: August 13, 2025 at 1:11 PM

Topic: 1994 Honda window question

Posted By: underground
Subject: 1994 Honda window question
Date Posted: November 09, 2003 at 5:49 PM

On a 1994 Honda Accord which wires do I hook up a window roll up module? I also want to know how to hook up a glass sensor and how do they work? Are they supposed to be mounted to the glass? Please help. Thanks in advance.

Replies:

Posted By: DjIQ
Date Posted: November 09, 2003 at 8:16 PM

I dont know about the roll up module, but glass break sensors dont hook up directly the windows, they have a microphone and the sensors in them pick up the frequencies that glass makes when its breaking.

-------------

Posted By: mobiletoys2002
Date Posted: November 09, 2003 at 8:50 PM

the driver window up wire is RED / blue the driver window down wire is RED / yelllow.
the passanger weindow up wire is blue and the down wire is blue / YELLOW.
the drivers reaer window up wire is GREEN/ blue and down wire is green
the rear passenger window up wire is yellow,and down wire is YELLOW /GREEN.
These wires are reversed polarity and are located at the master switch.

Posted By: underground
Date Posted: November 10, 2003 at 9:39 PM

Where is the easiest place to find these wires? Where should I look? Also why would the parking lights flash? Any ideals?

Posted By: joshuahoule
Date Posted: November 10, 2003 at 10:57 PM

I would go at it from the drivers side switch. (or where those wires enter through

the door jamb.) The parking lights should only flash with 12v, so something could

be connected to the lighting circut somewhere.

hope that helps

houligan

-------------
jhouligan

Print Page | Close Window