Help w/alarm and window module install

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21278
Printed Date: July 24, 2025 at 6:54 PM

Topic: Help w/alarm and window module install

Posted By: genso79
Subject: Help w/alarm and window module install
Date Posted: November 10, 2003 at 8:24 PM

I'm planning on coonecting the positive of the alarm to the +12 on the key cylinder..What is the recomended fuse and gauge wire i should use if t'm connecting :9 relays , 2 window modules , 1 door lock module (10 AMP) to the same wire.any help would be appreciated.....

Replies:

Posted By: auex
Date Posted: November 10, 2003 at 9:08 PM

For that much current/stuff, you should probably take it from the battery, at least 10 gauge. Why so many relays?

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: JWorm
Date Posted: November 10, 2003 at 10:22 PM

Window module power wires should go directly to the battery. The remote starter wiring can go to the ignition harness.

9 relays? WTF?

Posted By: genso79
Date Posted: November 22, 2003 at 11:23 AM

i have a window module that has 7 wires... the module can do 2 up or 2 down

where do i connect these 2 wire coming from the window module....

pink =to accesory item----------> ?????

orange=500ma activation--------> ????

any help would be appreciated....

Print Page | Close Window