Print Page | Close Window

2 way problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21282
Printed Date: May 19, 2024 at 9:01 AM


Topic: 2 way problem

Posted By: Z32TT
Subject: 2 way problem
Date Posted: November 10, 2003 at 10:04 PM

Clifford Matrix RSX3.5 on a 90 300zx and I got everything hooked and programmed, but the pager doesn't page me when warn away is triggered. It does page me when alarm is triggered though. Any ideas? suggestions?

I have proximity and shock sensors hooked up




Replies:

Posted By: Teken
Date Posted: November 10, 2003 at 11:01 PM
1) What icons appear when the system is paging?

2) What mode is the unit set for, vibrate / tone?

3) Is the page mode turned on / off?

Please varify the status of the above and programming options are indeed selected / initiated.


Regards

EVIL Teken...


Print Page | Close Window