Print Page | Close Window

Wich wire from Alarm to bypass transponde

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21284
Printed Date: July 22, 2025 at 11:04 PM


Topic: Wich wire from Alarm to bypass transponde

Posted By: Leshka
Subject: Wich wire from Alarm to bypass transponde
Date Posted: November 10, 2003 at 11:12 PM

I got alarm and i dont know wich wire will work.  Usuall its a negative ignition output. But this alarm does not have this name.  Here what it have.

Yellow Ignition input (+)  connect to +12 when the ignition is on and while cranking the started. This could not be it.

Blue/Orange Wire Ground when running output (-) 500mA Connect to an factory security bypass module.

Orange wire Anti-Frind output active a relay for anti-grind protection. Can some one explain what this feature is.

Violet/white wire Factory Disamr (-)

WHITE/ violet wire Factory Rearm(-)

BROWN / White wire horn output (-)  and this wire may be programmned as an ignition 3 relay trigger. I thinks This one is for by passing a transponder. 

So please tell me wich wire is for transponder.



-------------
LESHKA



Replies:

Posted By: Leshka
Date Posted: November 10, 2003 at 11:14 PM
Orange wire is Anti-Grind

-------------
LESHKA



Posted By: tjdurham
Date Posted: November 11, 2003 at 9:30 PM
blue orange is for your bypass

-------------
tj


Print Page | Close Window