Can anyone out there offer me any tips on installing a Auto Mate 530 in my '04 Corolla CE? I don't have power windows or power locks yet and don't feel like paying the $150 installers around here want. So if you could PLEASE offer any tips I would appreciate it. This is the DEI Alarm/Remote Starter combo.
Thanks in advance!
-------------
2004 Toyota Corolla CE
someone had posted the door lock install tip on here....it also had pics to look at..not sure where u can find them..do a search and it should pull them up for you...here is what i have on the 2003 toy..double check all of the wires with a meter...
Make: Toyota
Model: Corolla
Year: 2002-03
This Database Was Last Updated On: 6/9/03
Index #: 592
Alarm
Constant 12 volts WHITE IGNITION SWITCH HARNESS
Ignition 12 volts BLACK/ WHITE IGNITION SWITCH HARNESS
Starter RED IGNITION SWITCH HARNESS *
Dome Light RED / WHITE (-) IGNITION SWITCH HARNESS **
Trunk Pin Switch RED / WHITE (-) AT LIGHT IN TRUNK
Parking Lamp GREEN (+) CONNECTOR ON BACK OF FUSE BLOCK ***
Power Lock BLUE/WHITE 10 PIN CONNECTOR ****
Power Unlock BLUE / YELLOW IN DRIVER KICK PANEL #209
* Remove Positive Battery Terminal If Cutting To Prevent Check Engine Light. ** RED / WHITE (-) Key cylinder switch light. If This Only Gets Dr. Door Alt Location Is At The Back Side Of Drivers Side Fuse Junction Block. ***12 Pin Connector **** Child Safety Lock - WHITE (-) In 10 Pin In Driver Kick Panel. #209 - See Child Safety Door Lock Diagram.
-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Thanks for the quick response!
Ok couple more questions.
On my DEI Automate 530 Alarm, the primary harness needs a constant + power input and the Remote start primary harness needs a constant + power wire as well. Should I just twist these together and connect to 1 Constant wire in the Corolla? If so would it be the WHITE/ Black wire in the wire bundle?
Another question is on the Heavy Gauge Relay Satellite wires there are 2 fused Reds that need (+) High Current 12V Input where do these go? Do I just twist them together and run a wire off the battery? Or which wires are they in the cars wiring bundle?
hate to trouble everyone just wanting to get this done now.
Thanks in advance again!
Ken
-------------
2004 Toyota Corolla CE
Or if anyone has done a DEI install with this car and has the exact wire conections that would be great also
-------------
2004 Toyota Corolla CE