Print Page | Close Window

audiovox keyless entry ?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21498
Printed Date: July 13, 2025 at 9:36 AM


Topic: audiovox keyless entry ?

Posted By: elkie
Subject: audiovox keyless entry ?
Date Posted: November 15, 2003 at 9:37 AM

Hi all,

  I'm debating on how to add keyless entry to my 99 GMC truck.  The truck came with manual door locks.  So what is the best way to go about this?   get to actulators, then the 2 relays and setup it up like the diagram.  then hook the audiovox keyless up to the lock/unlock part on the relay.   Will that work    All in cost is $85.

 Or get the valiant kit, which is a keyless kit with the actulators include and is a simple plug in to get power locks and remote?   that kits cost $109 with shipping?

What due you think i should due.

thanks




Replies:

Posted By: draasch
Date Posted: November 15, 2003 at 9:55 AM
either way would work.... i would go with a central door lock system.
that way fi your keyless went out, you would still have the electric door lock feature. soal has the door lock kits. shop around. most kits will work any keyless unit. if you can find a kit at a good $$$$, drop me a line.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt





Posted By: elkie
Date Posted: November 15, 2003 at 10:57 AM

thanks for the info.

  What is soal?    do they have a website?

the central locking system i also looked at is 39.99 at a shop here in town.

If i went with getting the 2 different systems....add own actulators and the relays, how woudl i then hook up a keyless system?   just hook the wire from the keyless to the 30 on the relays?





Posted By: draasch
Date Posted: November 15, 2003 at 4:27 PM
if you go with the CDL system, the wiring info that comes with the kit will tell what wires to hook up. you will not have to wire up relays. just mount the motors and wire them up to the harness. the harness will then plug into the control box. most of your CDL will have a neg trigger for the door locks to work.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt






Print Page | Close Window