2001 Toyota Sequoia, Security with Keyless Entry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2160
Printed Date: July 14, 2025 at 8:48 PM

Topic: 2001 Toyota Sequoia, Security with Keyless Entry

Posted By: pushrodv8
Subject: 2001 Toyota Sequoia, Security with Keyless Entry
Date Posted: July 23, 2002 at 3:21 PM

Recently worked on a 2001 Toyota Sequoia installing security with keyless entry. Vehicle had 5 separate door trigger wires and I tried to use diodes as recommended, but could not figure why I could not get them to work. I tested each tigger with a mulitmeter. I first tried installing the diodes with the bands facing the doorpins and the alarm could not see the doors. So I reversed them and the alarm thought that the doors were always open, even with them closed. AM MISSING SOMETHING HERE, I mean diodes are not terribly complicated to figure out!?! Any help would be great and many thanks in advance.

Replies:

Posted By: Velocity Motors
Date Posted: July 23, 2002 at 9:11 PM

Are you using the right door trigger wire on the alarm ? Most systems come with a + and a - trigger wire to attach to the vehicle.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: pushrodv8
Date Posted: July 25, 2002 at 6:12 PM

Using negative door input on a DEI system.

Posted By: Velocity Motors
Date Posted: July 25, 2002 at 9:17 PM

Did you hook up likethis : https://www.the12volt.com/diodes/diodes.asp

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA