aps 996 wont RS when armed help!
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21701
Printed Date: May 14, 2025 at 11:25 PM
Topic: aps 996 wont RS when armed help!
Posted By: blue_g2
Subject: aps 996 wont RS when armed help!
Date Posted: November 20, 2003 at 9:27 AM
this is my second install of a remote starter alarm. my brother initially got his alarm done (91 integra) professionally but they couldnt do the RS because its illegal on a standard. he had his friend try and wire the remote start but somehow he couldnt do it and just quit. a couple weeks later i get the 791xv and i try my first install with tips i have picked up from this site. it was successful except a few minor GWAO probs that i fixed but ill get into that later. So i try to do his RS. it works out perfectly except My problem with the APS 996 RS is that it wont RS when the car is armed. When it is disarmed it will RS fine. i double checked all the heavy guaged wiring and its where it should be. i think it has something to do with the starter kill relay but im not sure because the starter kill relay i think also controls the GWAO. please help. thanks
Replies:
Posted By: profuse007
Date Posted: November 20, 2003 at 2:34 PM
check the starter wire coming from aps996. it should be on the other side of the starter kill relay(motor side).
whats GWAO?
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: misterjimbo
Date Posted: November 20, 2003 at 5:45 PM
profuse is on the right track... if you hook up the start to the cold side of the kill it will not start
-------------
Posted By: IXJ159
Date Posted: November 20, 2003 at 9:34 PM
I think it means ground when armed output
|