clifford concept 200 with remote start, and etc

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2178
Printed Date: May 19, 2024 at 10:11 AM

Topic: clifford concept 200 with remote start, and etc

Posted By: GReddyboy
Subject: clifford concept 200 with remote start, and etc
Date Posted: July 24, 2002 at 5:45 AM

I have a clifford concept 200, and would I be able to get the remote start, smartwindows, and the battery back up siren to work? From the brain theres only one datalink plug, so would I be able to use one of the add on accessories or I can have more optional data links? thanks

Replies:

Posted By: Big Dog
Date Posted: July 24, 2002 at 12:54 PM

Hey GReddyboy,

All G-4 products from Clifford have the datalink. Which means you can add several accessories in a daisy chain and the brain communicates the correct info to each component. The Intellistart-4 add-on starter has a data in and out and same goes for the SmartWindows-4. That's why they call it "The science of Security © " posted_image

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: GReddyboy
Date Posted: July 24, 2002 at 8:43 PM

Sweet.. Big Dog don't you you think it'll be easier to by pass the ignition/starter interrupt circuits on the alarm if they car has an remote start on it? since all the wires that are needed to start the car is right there where the remote start unit is. I guess if i do plan on gettin the remote start, i would also have to hide that unit very good. thanks

Print Page | Close Window