2004 dodge ram window help
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21841
Printed Date: May 10, 2025 at 3:05 PM
Topic: 2004 dodge ram window help
Posted By: mobiletoys2002
Subject: 2004 dodge ram window help
Date Posted: November 23, 2003 at 6:00 PM
Do i have to go into the driver door for window control? i am tring to do the driver and passenger window,i am using a 530 t.Can i get the wires inside instead of going into the door?
Replies:
Posted By: vaderfop
Date Posted: November 23, 2003 at 6:37 PM
For the Driver window you will probaly have to go into he door. For the passenger window you could probaly find the wires in the driver kick panel, butsince you would have to go into the door for the driver side i would just install the intire unit in the door. That way you only have to run ground when armed, power, ground ( i would run it to a frame of the car, instead of ground in the door, that way you will get a better ground), and the channel output (which ever channel you want to hook it up to, mine is on channel four...) into the car. IMO run 4 wires through the door should not be that bad.
Hope this helps.
-------------
Remember check all your wires with a DMM!
Posted By: mobiletoys2002
Date Posted: November 24, 2003 at 8:25 PM
well i think this car has a one touch window down on the passengerswitch side so do i have to go into both doors??
Posted By: gtchida
Date Posted: November 24, 2003 at 9:51 PM
mobiletoys, you should be able to catch the pass side at drivers kick panel
Posted By: securinu
Date Posted: November 24, 2003 at 10:50 PM
Keep in mind if you get the wires in the driver kick only the driver switch will have one touch up and down.
-------------
Joe O'Byrne
Owner / Installer
|