CS2400 Installation
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21924
Printed Date: May 12, 2025 at 2:42 PM
Topic: CS2400 Installation
Posted By: RavnKing
Subject: CS2400 Installation
Date Posted: November 25, 2003 at 8:22 AM
I was just given a Command Start CS2400 for nothing from my mom as she cannot put it in her new vehicle or it will void her warranty. The only problem is that I cannot find the installation manual that came with it? Does anyone have a copy of it they could send me or know where I can find a copy? Cheers, RavnKing ------------- Quando Omni Flunkus Moritati
(When All Else Fails, Play Dead)
Replies:
Posted By: HamiltonAudio
Date Posted: November 25, 2003 at 3:09 PM
remote starters when installed professionally and properly will NOT void any such vehicle warranty. let me guess, the dealer offered one of "their" starters for $1000 that "won't" void it....its a freakin joke. we all have the paperwork that proves warranty cannot be voided unless it is clearly proven that the remote starter did the damage. and THEN, they just refuse to fix the damage under warranty.... b
Posted By: RavnKing
Date Posted: December 09, 2003 at 10:03 AM
I am going to be installing a Command Start unit in my 97 Grand Prix SE 3800 and I am a little confused as to where I need to hook my tach sensing wire to? It says that it is used for over run protection, do I really need to hook this up? Cheers, Ravn ------------- Quando Omni Flunkus Moritati
(When All Else Fails, Play Dead)
Posted By: Velocity Motors
Date Posted: December 09, 2003 at 10:13 AM
Yes this is a mandatory connection for the unit to work properly. TACHOMETER is a PURPLE / white @ the ECM under the hood.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: RavnKing
Date Posted: December 09, 2003 at 1:05 PM
Is the ECM something that I should be able to find in my Haynes manual as I have no idea what the ECM looks like and that could prove to make things some what more difficult.
-------------
Quando Omni Flunkus Moritati
(When All Else Fails, Play Dead)
Posted By: Velocity Motors
Date Posted: December 09, 2003 at 1:19 PM
Yes, the ECM or PCM should be in your Haynes manual. IT will be the main junction block that all your wires go to in the engine compartment.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: RavnKing
Date Posted: December 09, 2003 at 2:25 PM
Sweet, thanks for the help Jeff. You just saved me from a big headache. Cheers, Ravn ------------- Quando Omni Flunkus Moritati
(When All Else Fails, Play Dead)
Posted By: Velocity Motors
Date Posted: December 10, 2003 at 9:42 AM
No problemo
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|