1990 Mustang Door Pins

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2199
Printed Date: May 02, 2024 at 6:12 PM

Topic: 1990 Mustang Door Pins

Posted By: foder
Subject: 1990 Mustang Door Pins
Date Posted: July 24, 2002 at 9:22 PM

I have installed a Clifford XL 1000 alarm and everything works fine except for the door pin trigger. I connected the gray alarm wire to the BLACK/ blue door pin wire (per the bulldog wire diagram). If i release the pin, nothing happens. If I then depress the pin, the alarm will trigger. Any ideas?

Erick

Replies:

Posted By: go2pac
Date Posted: July 24, 2002 at 10:06 PM

Did you program for postive door trigger? Default is negative.

-------------
Karl

Pacific Accessory Corporation
Mobile Audio Interfacing Equipment
Connecting You to Your Music Since 1976

Posted By: foder
Date Posted: July 24, 2002 at 10:25 PM

The alarm is a self-programming door trigger polarity type.

Erick

Posted By: dan768
Date Posted: July 24, 2002 at 10:38 PM

Are you using these wires?

Door 1	18ga. BLACK/ Blue (+) or Gray at driver’s kick panel
Door 2
Door 3
Door 4
Interior Lights	Same as door trigger

-------------
dan
Remember (there are no hard cars,some just take longer to install on then others)

Print Page | Close Window