97 mercedes 320 enginestart

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22090
Printed Date: July 17, 2025 at 12:36 PM

Topic: 97 mercedes 320 enginestart

Posted By: ossrom
Subject: 97 mercedes 320 enginestart
Date Posted: November 29, 2003 at 12:56 PM

i've installed an ingine start alarm in a 97 e320. the alarm works fine. however, the car wont remote start becuse of the imobolizer in the key. i have a bypass module from dei (555u) but i can not take the swithc apart to place the ring in place. am i using the correct module, if so how should take the switch apart. any help will be appriciated. thank you

Replies:

Posted By: JHesch
Date Posted: November 30, 2003 at 12:44 PM

Is the key a flip out blade key, or the newer bladeless key fob ( switched over in late 1997)? If its the newer style, the electronic ignition (eis) comes out easily, use a pocket screwdriver and spin the plastic trim ring counter clockwise, the EIS should come right out.

-------------
Jerry Hesch

Posted By: ossrom
Date Posted: December 01, 2003 at 9:44 AM

it's the flipout blade key

Print Page | Close Window