attaching lock actuator to lock
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22122
Printed Date: May 20, 2025 at 2:02 PM
Topic: attaching lock actuator to lock
Posted By: 4 guage
Subject: attaching lock actuator to lock
Date Posted: November 30, 2003 at 4:24 AM
Hello. I am having trouble with lock actuators(omega DS-2SQ from select products) in a 96 Tacoma. It's not the wiring, but the way to hook up the actuator's bar to open the locks. The truck's long bar connecting to the interior finger latch doesn't seem to open the lock. (This is where I assume they are intended to be attached).At the lock itself there doesn't appear to be anywhere large/long enough to mount to at all. The locks seem a tad stiff from age, but probably no more than normal. Has anyone installed power locks on this popular truck? Recently, I installed a Clifford AG4 in the Tacoma, and the manual locks are pretty archaic. Thanks, Dave.
Replies:
Posted By: 03zx3
Date Posted: November 30, 2003 at 6:25 PM
in the past weekend i jsut put actuators in an 03 ram and an 03 focus 2 very different installs if u can get me a pic of ur locking mech and inside of your door that would help me help you. question if u pull the button does it unlock and if u push it does it lock??
|