CS300i

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22200
Printed Date: May 10, 2025 at 8:01 AM

Topic: CS300i

Posted By: Justaguy
Subject: CS300i
Date Posted: December 01, 2003 at 9:09 PM

Does anyone remember programing? Or where to find it on the net? I got a new module for my neigbor, but i'm at home now and i don't have access to my documnents. Its just basic install with four or two cylinder (neon) tach settings. So i just need default channel 1 settings with tach for 2 or 4 cylinder.

Oh ya, and do you remember which button is channel 1, I'm not sure if it's lock or not.

Thanks in advance, my neigbor will apreciate it.

-------------

Replies:

Posted By: Velocity Motors
Date Posted: December 01, 2003 at 10:36 PM

Lock is button I unlock is button II and start is button III
Here is channel I programming: 12 step sequence

1 low temp ----- I ( OFF )
2 AUX 4 --------- II
3 AUX 4 --------- II
4 AUX 6 --------- I
5 AUX 6 --------- II
6 AUX 1 Pulse - I ( II double pulse )
7 AUX 2 Pulse - I ( II double pulse )
8 Remote Start Arming ----- I ( OFF )
9 Cylinder Selection ----- I ( 4 Cylinder 2970 rpm )
10 Cylinder Selection ---- II
11 Cylinder Selection ---- I
12 Cylinder Selection ---- II

The 2 Cylinder sequence is I, I, II, II

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Justaguy
Date Posted: December 02, 2003 at 12:47 AM

Thats sweet.

Thanks dude.

-------------

Posted By: Velocity Motors
Date Posted: December 02, 2003 at 7:43 AM

No problemo

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA