92 grand prix alarm remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22294
Printed Date: June 29, 2025 at 5:48 PM
Topic: 92 grand prix alarm remote start
Posted By: fordriver2
Subject: 92 grand prix alarm remote start
Date Posted: December 02, 2003 at 5:18 PM
I am possibly going to install a remote starter in a 92 grand prix and was just wondering if there is a second ignition in it. One of my wiring diagrams says there is and one of them says there isn't. Any clarification on tis matter would be helpful. Thanx.
Replies:
Posted By: sparkie
Date Posted: December 02, 2003 at 5:32 PM
There is a second ignition wire you must connect to. It is a dark blue/white stripe and powers the fuel pump.
-------------
sparky
Posted By: zargon
Date Posted: December 02, 2003 at 5:35 PM
our sheet says dark blue and white, jst use a meter while you are in there and check, most of the time in a gm second ignition is either gren or white,ignition will stay 12 volts even during crank.
-------------
zargon ruler of estranorth
Posted By: fordriver2
Date Posted: December 02, 2003 at 8:02 PM
Thanx Guys that really clarifies things for me.
Posted By: fordriver2
Date Posted: December 02, 2003 at 8:04 PM
One other question though. If I have a remote start that doesn't come equipped with a second ignition output, can I use a relay to wire the second ignition, and could you give me a diagram of how to do it? Thanx.
Posted By: fordriver2
Date Posted: December 03, 2003 at 4:36 PM
On the 92 Grand Prix there is a negative dark blue wire for the door trigger and there are also two other wires for the door lock/unlock that are positive. My question is do I use the dark blue negative wire to hook up the door lock/unlock feature on the remote start or do Iuse the other two positive ones. Any help would be great. Thanx.
Posted By: profuse007
Date Posted: December 03, 2003 at 4:40 PM
check this link out------------- Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: fordriver2
Date Posted: December 03, 2003 at 5:10 PM
That actually doesn't help me this car doesn't have an alarm system or the RAP on it. Just on the wiring diagram for the car there is a positive door trigger wire thats dark blue and two wires for the door lock/unlockwires that are negative and I'm just wondering which wires to use for the door lock/unlock feature on the remote start.
Posted By: fordriver2
Date Posted: December 03, 2003 at 5:11 PM
Do i need a relay for the trunk release if the trunk release wire is positive and the output from the remote start is negative and if I do how would I hook up the relay.Any help with this would be great. Thanx.
Posted By: sparkie
Date Posted: December 03, 2003 at 7:49 PM
You need a relay for the second ignition. Hook terminal #86 to the ignition wire from the remote starter. The ignition wire from the remote starter must also be hooked up to the pink ignition wire in the car. Terminal #85 of the relay hook to your remote starter's negative out when running wire or it may be called ground out when running. Hook terminal #30 to the fused side of your remotes starter's battery wire. Hook terminal #87 to the blue/white wire in the vehicle (2nd ignition)
The door locks in the vehicle use a 12 volt + pulse on the light blue wire in the kick panels for lock and a 12 volt + pulse on the white wire in the kick panel for unlock. Test the wires with a meter first to make sure you are using the right ones. Yes you must use a relay for the trunk release to convert a negative pulse into a positive pulse.
-------------
sparky
|