2002 ford escape remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22426
Printed Date: May 12, 2025 at 2:05 AM

Topic: 2002 ford escape remote start

Posted By: davidhdj
Subject: 2002 ford escape remote start
Date Posted: December 06, 2003 at 12:45 AM

I wanna install a remote start from design tech on my suv. does anyone have a diagram that tells you where and what colors the wire are. do i need to bypass anything or what else i need to get. thanks

-------------
D&M Auto Parts and Accessories

Replies:

Posted By: NFLEagles1
Date Posted: December 06, 2003 at 10:09 AM

You can find a wiring diagram for your vehicle at bulldogsecurity.com.

I found information about my Protege here on the12volt.com and bulldogsecurity.com. Both had conflicting information. After testing all connections, I found that both had some correct, and some incorrect information. It is EXTREMELY important to test the wires your diagram suggests you use. A probe might be a good idea to get. You can push the needle through the shielding of the wire and test it.

Posted By: mbsaudio
Date Posted: December 06, 2003 at 2:10 PM

Never use a probe on these new vehicles. The computer components are very sensitive. Always use a DVM. Much safer. Not sure what vehicle you are doing.

Posted By: misterjimbo
Date Posted: December 06, 2003 at 9:24 PM

every tech sheet i have seen has the wrong tach wire use the wire in pin 78 for tach. open the hood and look at the firewall. see that big connector with the wire harness going into it? pin number 78

-------------

Print Page | Close Window