1998 mazda 626 transponder bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22592
Printed Date: September 12, 2025 at 3:07 PM

Topic: 1998 mazda 626 transponder bypass

Posted By: tsalas469
Subject: 1998 mazda 626 transponder bypass
Date Posted: December 09, 2003 at 9:11 AM

Any suggestions for a transponder bypass for this vehicle other then a 555U does not want to work, or does anybody have document 1061 from directfax????

Replies:

Posted By: swinstal
Date Posted: December 09, 2003 at 5:53 PM

You can bypass the transponder but you need to get another key thats programed to the car and get an antenna ring (like whats in the key cylinder) from a mazda dealer there like 10.00 and then use a relay so this new bypass you made is only active when the remote start is used (status output wire) and so when the key is inserted the car dosen't see 2 keys. you can get the 1061 document from DEI's website. That document will explaine it better then i did. and the 555u will not work! antenna part number is GD7B-66-938

Posted By: HamiltonAudio
Date Posted: December 10, 2003 at 2:44 PM

instead of building your own and hacking in a relay, why not just use a TBKIII or similar jewelry box? Sucks to lose the key, but if you have to, at least do it the slick way....