Print Page | Close Window

wiring diagram for command start cs 2400

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22697
Printed Date: May 14, 2025 at 11:05 AM


Topic: wiring diagram for command start cs 2400

Posted By: chrisjo
Subject: wiring diagram for command start cs 2400
Date Posted: December 11, 2003 at 8:57 AM

I have a CS 2400 but no installation instructions. It is going into a 93 Grand Marquis. I am looking for wiring diagrams for the starter and the car.




Replies:

Posted By: defective
Date Posted: December 11, 2003 at 3:19 PM

i dont have the starter diagram handy but heres your car:

12v+ - yellow - ignition harness (theres five of them, just pick one)

ignition - RED / light green - ignition harness

second ignition - gray / YELLOW - ignition harness (theres two, pick one)

third ignition - BROWN / pink - ignition harness

accessory - BLACK/ light green - ignition harness

starter - WHITE/ pink - ignition harness

parking lights - brown(+) - headlight switch or driver kick panel

brake lights - light green - at brake pedal

lock - pink / YELLOW(-) - behind glovebox or in either kick panel*

unlock - pink/light green(-) -behind glovebox or either kick panel*

* If it has OEM keyless, it is a regular negative pulse. If it doesn't have keyless, it's a reversal at rest lock system

trunk release - purple / YELLOW(+) - release switch or rear body harness

OEM Horn - yellow/light green(-) - steering column harness

Tach - tan / YELLOW - pin #2 at ignition control module

have fun, its a complicated one.



-------------


Print Page | Close Window