how to connect 2 starter wires for Nissan
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22780
Printed Date: June 29, 2025 at 5:40 PM
Topic: how to connect 2 starter wires for Nissan
Posted By: nguyen
Subject: how to connect 2 starter wires for Nissan
Date Posted: December 13, 2003 at 7:47 AM
I know NISSAN MAXIMA 1999 have 2 starter wires, I want install remote car starter commando 5005 on it. May some one help me how to connect 2 starter wire by Relay?
If some car have 2 accessory wire, which diagram of relay we can connect?
Can some one send me a document # 1070 power unlock for Lexus RX 300?
Thanks
Anthony Nguyen
Replies:
Posted By: Velocity Motors
Date Posted: December 13, 2003 at 9:29 AM
Second Starter relay configuration Second Accessory relay configuration ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: 10nesne1
Date Posted: December 13, 2003 at 9:32 AM
I already replied your second accessory wiring configuration. It's the same way to hook up Second Starter wiring.
Good luck.
Check your PM message.
Posted By: Velocity Motors
Date Posted: December 13, 2003 at 9:46 AM
??? How can the 2nd starter relay be the same as the 2nd accessory. The 2nd starter can only be activated for the duration that the starter is engaged and then shut down, while the 2nd accessory relay requires power throughout the remote starter sequence. I think I just misunderstood your post, right ? ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: 10nesne1
Date Posted: December 13, 2003 at 10:06 AM
I didn't say it's the same. I said the relay configuration is the same. Jeff, you and I know that those were different wires in the ignition harness.
Second Starter wire for cold start only, if the vehicle is not hookup and it will not start in the winter. The Second Accessory wire required power throughout the remote start sequence for 10 min, 15 min, or 20 mins to run heater, or other accessory in the vehicle.
He sent me a PM regarding second accessory wire. I PM him back the relay configuration diagram.
Posted By: NowYaKnow
Date Posted: December 13, 2003 at 11:14 AM
I always just jump the starter output from one starter wire to the other, no relays involved. True the wires are no longer isolated, but it hasn't caused a problem and some manufactures actually tell you to do it this way..Works for me..Now accessory wires I would NOT do that with..Those I keep seperate..Good luck,
Mike
Posted By: nguyen
Date Posted: December 13, 2003 at 11:58 AM
Thank you very much
Posted By: nguyen
Date Posted: December 13, 2003 at 11:47 PM
Can some one send me a document # 1070 power unlock for Lexus RX 300?
Posted By: NowYaKnow
Date Posted: December 14, 2003 at 2:35 AM
Ehh..Look at it yourself:
https://www.directechs.com/techtips/pdfs/resources/security/directed_techtips/1070.pdf
|