Autostart 2510 software updates

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22883
Printed Date: June 10, 2024 at 12:17 PM

Topic: Autostart 2510 software updates

Posted By: matthewc
Subject: Autostart 2510 software updates
Date Posted: December 15, 2003 at 8:48 PM

Hi,

Has anyone here heard of software updates for the Autostart 2510's. I am having major problems with my unit and Autostart advised me to use there software update to get the newest verion of 3.5 and that *may* solve my problems!!Apparently they send you a new chip and you pop open your module and stick it in.Anyone heard if this solves a lot of problems with the Autostart units??

Thanks,

Matt

Replies:

Posted By: derek123
Date Posted: December 16, 2003 at 10:02 AM

Software 3.5 improves the remote's conformation.

Posted By: matthewc
Date Posted: December 16, 2003 at 11:56 AM

Thanks! Is there any way of looking up what revision 3.4 was for, 3.3, ect...Such as 3.5 adds: Better confirmation.3.4 adds: yadda yadda.Were would I find more information about autostart software updates, there web page gives little to no info.

Thanks again,

Matt

Posted By: titi0511
Date Posted: January 14, 2004 at 9:49 PM

Check the label on the back of he unit.

After the date is the hardware and sofware #. The software # starts with S or F. TW system with software F3.5 works much better.

We had some problems with Autostart's products before but their hardware H3.4 and software F3.5 works perfect now. Problems as the unit couldn't read tach, no start ... were fixed. I'm happy now. My store go back with their products.

posted_image

-------------
Newbee

Print Page | Close Window