Alpine 8048 installation

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2292
Printed Date: July 20, 2025 at 7:58 PM

Topic: Alpine 8048 installation

Posted By: alwong
Subject: Alpine 8048 installation
Date Posted: July 28, 2002 at 1:10 PM

Hi all,

I dug up an old alpine 8949 from my pile of misc stuff but could not find the installation manual. Does anyone know where I might be able to find the witing diagram or installtion guide?

Any help would be greatly appreciated.

Al Wong

alwong@xri.com

Replies:

Posted By: Velocity Motors
Date Posted: July 28, 2002 at 1:49 PM

You have conflicting model number on your post and your post header, which one do you need ?? 8048 or 8049 ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: alwong
Date Posted: July 28, 2002 at 5:35 PM

Sorry, fat fingered it.

I have the following:

sec 8048 control unit, 8341 window module, Radar sensor, Led, Valet switch, and impact sensor.

I had this unit installed in my fiero years ago, and when I sold the car, I just started cutting wires. Now I can't find the install guide.

Thanks,

-------------
alw

Print Page | Close Window