95 grand prix remote starter
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22945
Printed Date: May 28, 2024 at 6:53 PM
Topic: 95 grand prix remote starter
Posted By: muaiad97
Subject: 95 grand prix remote starter
Date Posted: December 16, 2003 at 8:53 PM
hello all i have grand prix 95 i installd the remote starter with bypass moduel # 791. it,s working good but i have problem the car is not runing with the key but its working with the remot starter. please anyone can help me with that .
Replies:
Posted By: ck auto
Date Posted: December 16, 2003 at 9:04 PM
hi make sure you have power on all ign wires when key is in ign maybe you pulled wire out of plug or blew fuse ------------- good luck
kirk
Posted By: muaiad97
Date Posted: December 16, 2003 at 9:18 PM
thank you i cheked every wire they are ok but i mean mybe its the security. because ther is no crank with the key but the car working with remot starter
Posted By: ck auto
Date Posted: December 16, 2003 at 9:39 PM
did you maybe hook up your bypass wrong try taking bypass out and see if it starts ------------- good luck
kirk
Posted By: chriswallace187
Date Posted: December 16, 2003 at 9:47 PM
Check how you hooked up the VATS wires. I've never done a 791, but I assume in this hookup you had to cut one of the two VATS wires, and hook the wires from the bypass module up as such - one wire gets spliced into the uncut VATS wire, one goes to the key side of the cut wire, and one goes to the PCM side. If the key side has the incorrect or no wire hooked up to it, it would cause the problem that you're having.
Posted By: muaiad97
Date Posted: December 16, 2003 at 10:20 PM
thank you all i took out the remot starter of the car to see the car will work.but still dosnt work with the key.befor i install the remot starter the car was working with the key.but now is not only with remot starter working.
Posted By: muaiad97
Date Posted: December 17, 2003 at 4:25 PM
grand prix 95 please i need help.help before i install remot starter the car was working very good. after i installd remot starter the car still working good but only with the remot starter. with the key ther is no crank all ligths comes on and the dash too but no crank. the starter is bulldog and the bypass moduel is 791. please help
Posted By: sparkie
Date Posted: December 17, 2003 at 7:07 PM
The problem you describe is likely caused by the way the bypass is hooked up. For a better and easier method, measure the resistance of the resistor in the body of your key with a meter. Measure from one side of the key to the other. Get a resistor of this value and a relay. Wire the relay as follows:
Pin # 85 to the ground out when running of the remote starter.
Pin # 86 to ignition (pink in the car's ignition harness)
Pin # 87a to the cut side of the VATS wire (key side) - This is one of the two small white wires sheathed in the orange or black wrap.
Pin # 30 to the other side of the cut VATS wire
Pin # 87 to the resistor and then to the uncut VATS wire.
With this set up you don't need your bypass and the integrity of the VATS system stays intact. The relay and resistor should be available at most electrical supply stores or stereo shops.
-------------
sparky
Posted By: muaiad97
Date Posted: December 17, 2003 at 8:07 PM
Thank you for ur help. but the problem is i took out the remot starter of the car to see the car will start but still ther is no crank and i put back all the wires like befor i install the remot starter.with the key it dosnt work.
Posted By: muaiad97
Date Posted: January 16, 2004 at 7:42 PM
hi all i am trying to bypass the securety in grand prix the mesurment in the key says 9.53 kom.i cant find that valu can i use closer to that number thanx for help
Posted By: bassop823
Date Posted: January 16, 2004 at 8:50 PM
You can use a value that is close as long as it is within the percentage of difference that is allowed. I am not sure what that difference is, but I will try to look it up for you. What is the value that you have that is close?
-------------
bassop
|