2003 Dodge Dakota alarm/remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=22957
Printed Date: May 01, 2024 at 9:35 AM

Topic: 2003 Dodge Dakota alarm/remote start

Posted By: albethatqban
Subject: 2003 Dodge Dakota alarm/remote start
Date Posted: December 17, 2003 at 12:42 AM

I installed an alarm remote start(554t) in a 2003 dodge dacota and am having problems with the door trigers. After one min. or so the driver's door triger seems to get a neg. signal. I diode isolated the trigers with the catode torwords the door triger not the alarm.Can someone please please help.

Replies:

Posted By: Javelin3o4
Date Posted: December 17, 2003 at 1:31 AM

this is what DEI states for wiring, this maybe how you done it but just thought id post it anyways...

The driver door trigger is tan in pin 15. The passenger door trigger (and rears on the 4 dr) is tan/red in pin 13. Use both wires and diode isolate each from the BCM

Posted By: Geeque
Date Posted: December 17, 2003 at 10:26 AM

cathode should go towards alarm

-------------
Gary Kline
MECP Master Technician

Print Page | Close Window