Print Page | Close Window

'90 Civic and Crimeguard 528i3

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2312
Printed Date: July 12, 2025 at 10:21 PM


Topic: '90 Civic and Crimeguard 528i3

Posted By: gogzhad
Subject: '90 Civic and Crimeguard 528i3
Date Posted: July 28, 2002 at 9:24 PM

I have a few questions on this installation:

-I installed with optional three relay block to enable driver door priority unlocking - it doesn't work - any suggestions? Otherwise works fine.

-Driver door master lock/unlock button now does not work - related to first problem?

-Should or could three relay block be relocated inside driver's door? Currently under dash - requires long leads to lock control unit, wonder if long leads part of problem?

Other than inoperative master switch and priority unlock, system functions normally.

Any suggestions greatly appreciated - I think I have it connected correctly -



-------------
thanks,
dave



Replies:

Posted By: Velocity Motors
Date Posted: July 28, 2002 at 9:29 PM

To enable priority door unlocking on an OEM system that does not have priority unlocking you have to go to each individual lock motor and grab the wires there. Otherwise everytime you try to unlock or lock the doors using the master switch, you end up lockin/unlocking the other doors as well. Unplug all the wires that you hooked up to the relays to the doors and see if the switch still works for you. Otherwise you may have done something bad posted_image....... Post your results.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window