Print Page | Close Window

Question about Lynx 2000

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23218
Printed Date: June 04, 2024 at 6:55 PM


Topic: Question about Lynx 2000

Posted By: spyderman_maryj
Subject: Question about Lynx 2000
Date Posted: December 22, 2003 at 5:11 PM

I have a question for the experts about my Lynx 2000 Alarm-R/S combo unit.  Currently I have both a shock sensor and a proximity sensor installed and they work fine, but on the remote when a shock is detected, it shows impact like normal and the proximity shows as the hood opened!!..  My question is can I have my installer hook it up I assume using diodes, so when the proximity is tripped it would show as BOTH impact and doors.. or BOTH impact and hood..  WILL THIS DO DAMAGE TO THE CPU/ALARM BRAIN UNIT??   I want to be able to tell if it is infact the proximity and not someone opening the hood.  The car is a convertible, and so I often park it with the top and windows down, so when it has gone off, it always shows as the hood opened

Thanks...




Replies:

Posted By: Velocity Motors
Date Posted: December 24, 2003 at 8:52 AM

Yes you can do this. Very easy to do with diodes ( your installer will be able to do this for you ).



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: spyderman_maryj
Date Posted: December 29, 2003 at 9:06 PM

Thank you Jeff.  I just wanted to be sure it would not damage the unit..

Ryan


Print Page | Close Window