1997 jeep grand cherokee

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23239
Printed Date: June 10, 2024 at 12:34 AM

Topic: 1997 jeep grand cherokee

Posted By: wire4veins
Subject: 1997 jeep grand cherokee
Date Posted: December 22, 2003 at 10:58 PM

Looking for any information or any problems encountered
hooking up the door locks.

Replies:

Posted By: JWorm
Date Posted: December 22, 2003 at 11:35 PM

Your vehicle's locking system is on a databus. No triggers in the tvehicle for unlock and lock. You must go into each door and 5 wire the locks. Get a 455T from DEI. Connects to two data wires in the diagnostic plug and does lock ,unlock, arm, disarm (of factory alarm), and domelight supervision too. Otherwise you'll spend 4+ hours doing the locks.

Posted By: livewire 1096
Date Posted: December 24, 2003 at 8:44 PM

before the 455T we used to use - pulses to the board in bcm under teh drivers door switches. mess that up it's coulpe hunderd to replace. the 455T is the easy, fast and reliable solution.

-------------
livewire posted_image

Print Page | Close Window