key fob compatability
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23369
Printed Date: May 20, 2025 at 3:15 AM
Topic: key fob compatability
Posted By: 7t3vette
Subject: key fob compatability
Date Posted: December 26, 2003 at 11:08 AM
my father in law has a designtech r/s that i installed about 3 years ago. some how he got the key fob wet or something and now it doesn't work anymore. are there any fobs that are compatable to these without spending 40-50 dollars, since the whole thing probably only cost him 70 dollars. i have seen the designtech website, but i have also seen other companies selling theres for 15 dollars. i have the numbers off the back of keyfob if that helps anyone. thanks, 7t3vette
Replies:
Posted By: Teken
Date Posted: December 26, 2003 at 12:18 PM
www.replacementremotes.com
www.remotes.com
www.lock.com
Perhaps you could use one of these companies services, they also do repairs.
There was a link for automotive remote securities, if I am able to find it, I will place it in this thread.
Regards
EVIL Teken . . .
Posted By: 7t3vette
Date Posted: December 26, 2003 at 3:41 PM
Thanks Teken i'll check those sites out for him 7t3vette
Posted By: jrilla
Date Posted: December 26, 2003 at 3:43 PM
I have an older one that I could send you. What model starter do you have? what does the remote look like?
-------------
J Rilla
Owner/Installer
Posted By: Teken
Date Posted: December 26, 2003 at 4:22 PM
https://www.autotechs.com/cat32.htm
Please copy and past the above link. This vendor can obtain most of the main stream remotes on the market. I did not see the brand you are asking for listed.
But you may be able to ask him if he also carries a universal model which I have seen alot of.
If it is a fixed code remote, then that style of universal remote is easily used in your application.
Regards
EVIL Teken . . .
Posted By: 7t3vette
Date Posted: December 27, 2003 at 9:40 AM
hey jrilla, i have a picture of the remote. it is a one channel remote. the numbers on the back are DOC ID: 1476182320(8 could be a zero) and FCC ID: ELGTRAN2. I have my father in law trying to get number off module. how do i get this picture to you. thanks 7t3vette
Posted By: jrilla
Date Posted: December 27, 2003 at 9:54 PM
Yeah mine is the one seen on this link. 5 buttons, so i am pretty sure it wont work.
https://www.designtech-intl.com:8080/merchant.ihtml
-------------
J Rilla
Owner/Installer
Posted By: 7t3vette
Date Posted: December 28, 2003 at 9:52 AM
thanks jrilla, ill keep checking or tell him to just buy another cheap system.
|