Print Page | Close Window

ProStart 5060 Installation question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23371
Printed Date: May 20, 2025 at 5:04 PM


Topic: ProStart 5060 Installation question

Posted By: richardfinnie
Subject: ProStart 5060 Installation question
Date Posted: December 26, 2003 at 12:27 PM

Hi

I am having serious problems installing my ProStart 5060 alarm/command start combo. When I try to put the unit into program mode, it won't stay in program mode. For example, using the valet switch I can get the unit in and out of valet mode then using the hood pin I can get the parking lights to stay on for the 20 sec. duration. After that though, it asks to turn the vehicle on and off and the LED will start flashing, but mine starts flashing when the parking lights are on, but once I turn the vehicle off it stops. Any ideas from anyone who is familar with this model? Any help would be appreciated. Thanks



-------------
Rick



Replies:

Posted By: ck auto
Date Posted: December 26, 2003 at 4:57 PM
hi if your in edmonton pm me and ill give your my phone number and try and help you ive put a few of those in. if you dont mind the long distanche call anyways

-------------
good luck
kirk


Print Page | Close Window