jdl-pk not working
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23377
Printed Date: May 21, 2025 at 3:03 AM
Topic: jdl-pk not working
Posted By: Peter_Mayers
Subject: jdl-pk not working
Date Posted: December 26, 2003 at 2:20 PM
Hi, I was dioing install using clifford rs3.5 and jdl-pk for my jeep. Everythig seems to be working except the jdl-pk box. When I connected it for the first time it would set off factory allarm uppon arming. After i have disconnected the battery and checked the wires,which were in order, the jdl-pk stopped responding to the dorlock triggers.The bypass works and lets me do remote start but it does not lock or unlock the car anymore. I have applied direct dround to the wires and nothing happens. Any ideas? Thank you for your help, Peter
Replies:
Posted By: Velocity Motors
Date Posted: December 26, 2003 at 2:40 PM
Did you make sure that you hooked up the DATA WIRE ( purple ) last when you installed the unit ?? What year Jeep is this as well ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Peter_Mayers
Date Posted: December 26, 2003 at 8:55 PM
I have hooked up the wire last and it would lock the dor and roll the windows up, except that it was setting the factory allarm off right after arming. I have disconnected the battery, checked the wires and when I connected the battery it stopped locking unlocking and rolling the windows up. At that point everything was wired in so I guess the data line was not the last one at this point. When I reconnect the battery it sets the factory allarm off so I know that it does talko to the data bus at that point. After that nothing happens. The jeep is 2001 grand cherokee. Any ideas? Thanks for your help.
Posted By: Velocity Motors
Date Posted: December 26, 2003 at 10:20 PM
Did you use the PINK/WHITE wier for the dome light output ?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: Peter_Mayers
Date Posted: December 27, 2003 at 12:35 AM
no i did not use the light. i connected: remote start input, lock, unlock, second unlock, horn input from the siren, ground power and the data bus.
Posted By: Peter_Mayers
Date Posted: December 27, 2003 at 12:38 AM
Sorry for the previous post. my formatting got screved up. no i did not use the light. i connected: remote start input, lock, unlock, second unlock, horn input from the siren, ground power and the data bus.
|