trouble installing ultrastart, 90 lumina
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23378
Printed Date: May 19, 2024 at 2:02 PM
Topic: trouble installing ultrastart, 90 lumina
Posted By: viper91180
Subject: trouble installing ultrastart, 90 lumina
Date Posted: December 26, 2003 at 3:14 PM
Hey gang, im having trouble getting a new ultra start to work in a 90 lumina, the car will crank with the key fob but wont start, just cranks for 20 seconds or so and thats it, also the led lights on the antenna wont go off either?????????????????
Replies:
Posted By: jrilla
Date Posted: December 26, 2003 at 3:38 PM
Um, I dont think letting the starter crank for 20 seconds is a good idea. You may have your accessory and Ignition wires mixed up. Did you grab both ignition wires? Pink and Blue/White are the 2 I show.
-------------
J Rilla
Owner/Installer
Posted By: viper91180
Date Posted: December 26, 2003 at 3:48 PM
both ignitian wires? no i only used the pink one, according to my instalation manual, theres only one ignition output on the modual, what should i do with the other one on the car?,
Posted By: Teken
Date Posted: December 26, 2003 at 9:01 PM
Ignition 1 is the PINK wire. Ignition 2 is DARK BLUE / WHITE wire, just to be clear.
Regards
EVIL Teken . . .
Posted By: viper91180
Date Posted: December 28, 2003 at 1:38 PM
yeah i got that from the color codes for he car, but the ultra start only had one ignition wire so i just used ign 1, then after i got jillas reply i tagged into both of them and it started right up, thanks guys.
Posted By: Teken
Date Posted: December 28, 2003 at 5:40 PM
Good to hear it all worked out. Always feels good to know you tried something, and it worked well.
Kick back a few cold one's knowing you did it yourself.
Regards
EVIL Teken
Posted By: JWorm
Date Posted: December 28, 2003 at 6:05 PM
What do you mean the Ultrastart only has one ignition output? The white wire is a second ignition output.
Posted By: brunetmj
Date Posted: December 28, 2003 at 8:07 PM
Yes Jworm is correct. The white wire can be set for 2nd ignition.
Posted By: viper91180
Date Posted: December 31, 2003 at 5:51 PM
the wite wire just said to be used for an auxiliary output, never mentioned ignition so i didnt use it just tied into both with ign 1, thanks though ill know for next time
Posted By: draasch
Date Posted: January 02, 2004 at 8:30 AM
glad to see that we could help our neighbor to the north...spread the word and tell people to donate to the site...keep up the great work guys! ------------- Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
|