96 honda accord door trigger?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23387
Printed Date: May 24, 2025 at 2:44 AM

Topic: 96 honda accord door trigger?

Posted By: aricanderson
Subject: 96 honda accord door trigger?
Date Posted: December 26, 2003 at 8:14 PM

I just installed a black widow bwfm550 model car alarm in my girlfriend's 96 honda accord. I got everything to work except the door trigger does not arm the alarm or go off when the car alarm is alarmed. Does anyone know what could be the problem? Plus where can I get another copy of the installation instructions for that particular black widow car alarm?

thanks

aric

Replies:

Posted By: HamiltonAudio
Date Posted: December 26, 2003 at 8:18 PM

first of all, u need to be more specific about the car. what year/make/mode? second, its clear you hit the wrong door trigger and/or used the wrong trigger input on the alarm....

Posted By: aricanderson
Date Posted: December 26, 2003 at 8:29 PM

okay its a black 1996 honda accord 4 door sedan 2.2 liter fuel injected engine with no factory alarm and grey interior. I think its an ex model

Posted By: Teken
Date Posted: December 26, 2003 at 8:34 PM

It is very common for the door triggers to corrode. I would suggest that you make this simple check first at each door to varify that it is not just a simple door switch that is setting you back.

Another suggestion is to varify that you have the correct wire which is BLACK/ WHITE (-) which can be accessed at the drivers dash panel.

Regards

EVIL Teken . . .

Print Page | Close Window