Clifford CliffNet Pro
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2339
Printed Date: November 04, 2025 at 7:12 AM
Topic: Clifford CliffNet Pro
Posted By: RareSI
Subject: Clifford CliffNet Pro
Date Posted: July 29, 2002 at 12:16 PM
Is any here able to get me the CliffNet PRO VERSION for my Clifford alarm? From what I understand, the cable is the same for the base and pro version, but the software on CD-ROM is differnet. Is there any chance I can get AT LEAST the software from someone?
Replies:
Posted By: RareSI
Date Posted: August 06, 2002 at 3:32 PM
ttt
Posted By: gpgtp00
Date Posted: September 08, 2002 at 3:29 PM
i would like to get it too
Posted By: penogg
Date Posted: January 25, 2003 at 10:52 PM
I also would like to get CliffNet Pro..... KP
Posted By: themagicone
Date Posted: January 25, 2003 at 11:15 PM
check your email, i sent it to you raresi.
Posted By: penogg
Date Posted: January 25, 2003 at 11:42 PM
Sorry, but I seemed to have missed the file attachment? Also, I hope that I don't overstep my bonds, but I need the pin outs to make up the cable. That would be the 3 pin from the Anant Guard 4 to the RS-432. Apparently the Clifford has the following coming out of the pins: GND 12VDC ?? DATA? Thanks, KP
Posted By: themagicone
Date Posted: January 25, 2003 at 11:49 PM
its bout 3 mb can your email handle that? On the cable you on your own, i dont know nothing on that
Posted By: penogg
Date Posted: January 25, 2003 at 11:59 PM
yes, I can take up to 5MB... Thanks!! KP
Posted By: Decay
Date Posted: March 08, 2003 at 1:48 PM
themagicone any chance of sending 'pro' my way also please ?
webmaster@edmondegan.co.uk if you can.
Thanks
Decay
Posted By: themagicone
Date Posted: March 08, 2003 at 3:15 PM
if i can find it i'll send it to you
Posted By: camino
Date Posted: March 08, 2003 at 9:01 PM
i hope you can go here https://www.directechs.com/techsoft/cliffnet.asp
Posted By: Decay
Date Posted: March 09, 2003 at 12:26 PM
themagicone wrote:
if i can find it i'll send it to you
Thanks matey been after this for quite a long time, also does anyone know if the g5 cliffnet is backwards compatible with g4 as the new software is sposed to be win xp compatible.
P.S If anyone got the xp ver and can send it, that would also be appreciated.
Regards
Decay
Posted By: niloc
Date Posted: March 11, 2003 at 1:16 AM
If its not too much trouble, could I get a copy? I would appreciate it. My email is colin@acrim.com
Posted By: aka2
Date Posted: March 12, 2003 at 5:50 PM
Not possible to make a lead for the wiznet,it has a little box of tricks in the middle! They only cost about £15 though. If anyone still needs the pro version 3, mail me
Posted By: Decay
Date Posted: March 16, 2003 at 12:04 PM
aka2] wrote:
Not possible to make a lead for the wiznet,it has a little box of tricks in the middle! They only cost about £15 though. If anyone still needs the pro version 3, mail me
I sent you a pm about the pro software, if you can email to webmaster@edmondegan.co.uk i would really appreciate it.
Thanks
Eddie
Posted By: drcustom
Date Posted: March 16, 2003 at 4:44 PM
I'd really appreciate if you could send it my way also.
dritchi2@du.edu
or you could direct connect with me on AOL IM-
ritchie2413
Posted By: gpgtp00
Date Posted: March 16, 2003 at 9:58 PM
i have Cliffnet Pro. I was using it on a laptop that had Win 98. I installed it on my new one thats running XP. I havent tried it yet though. Coud someone send me the XP version of Cliffnet Pro as well? Thanks SnakeyedR1@comcast.net
Posted By: MattL
Date Posted: March 19, 2003 at 10:51 AM
Hiya,
Can i have a copy of the pro software please.
hunky_matt@lycos.co.uk
Cheers
Matt
Posted By: Tbonespitin
Date Posted: March 21, 2003 at 12:29 AM
I really need a copy of that pro version as well if you could send it. Just the win 98 version is all I need. tbonespitin@aol.com thanks
Posted By: aka2
Date Posted: March 21, 2003 at 1:22 AM
What is the feature of the Pro version that you need to play with?
Posted By: Tbonespitin
Date Posted: March 21, 2003 at 2:35 AM
On my version of cliffnet I don't have the installer features view & control. I need it to program the settings on the auxiliary channels. (im assuming this since I don't see any options for it on my software) I don't have door handles and need to use aux. a and b to activate solenoids to pop my doors open. (i need to program them to be timed for 1 sec instead of the factory preset pulsed setting)
Posted By: gpgtp00
Date Posted: March 21, 2003 at 5:55 AM
if you guys wanna explain how i can compress this CD into a file small enough that i can send, ill send it. Im running WIN XP. I compressed the CD, but the file is still pretty big.
Posted By: BXTale
Date Posted: March 25, 2003 at 8:57 AM
Hello, I was wondering if anyone have the PRO version for XP. Can someone email it to me please, ThanX I am removing my alarm and reinstalling it in my new car. Thanx At Siribx@iwon.com ------------- "Da Pride Of Kingsbridge"
Posted By: Ricky327
Date Posted: April 19, 2003 at 4:20 PM
Hi Guys Good news for some as it is possible to copy the cliffnet cable. Most people think its just a cable connected to your serial port...well no. There is a small box which process the signals. Most dealer will tell you that its a special circuitry and cant be copied. Well having paid for mine at £50 last week...opened it and found a single CHIP and some other components inside...labeled SP232ACN. This chip convert the RS232 signals to and from your serial port into a proper signals so that your clifford alarm can undrestand. I saw a post regarding an AUDIO cable? well it just look like a power socket...only needed when your serial port cant provide the +5V needed to power the circuit...Ill investigate. The SP232ACN chip is not so common, but it is possible to use a MAX232 chip readily available from MAPLIN in UK...typically used in PC to smartcard emulations. I will start probing the circuit and build my own...Anyone interested? I just think that £50 for a £5 circuit plus a free software from clifford site is a rip off. The package didnt even comes with the PRO version!!! I bought this just to program my smartwindows and the remote headlight...Can I adjust the headlight timing with the PRO? Can you please direct me where to find the PRO for XP. Many Thanks...
Posted By: Charlesrunner95
Date Posted: May 08, 2003 at 10:42 AM
I new to the forum but was also requesting a copy of cliffnet pro. If anybody could help me out I could possibly repay the favor. Please email cg41868@appstate.edu Thanks Charles
Posted By: michaelrc51
Date Posted: May 08, 2003 at 3:18 PM
I bought the user package, does it come with the pro version? If not can someone send me a copy also. Thanks michaelrc51@hotmail.com
Posted By: BMBUM
Date Posted: May 12, 2003 at 10:11 PM
Installing a Millennium in my car this second. I'd really appreciate if someone could shoot it my way also it would be a huge help. Running Win2k. wavjr@optonline.net
Posted By: robHI
Date Posted: May 12, 2003 at 10:50 PM
can some one send a copy of Clifford CliffNet Pro to sunny-l@hawaii.rr.com. also a possible diagram of the cable
Posted By: primo
Date Posted: June 04, 2003 at 10:15 PM
How to access Installer options on the Cliffnet Wizard?
Posted By: nighthawk2k
Date Posted: June 04, 2003 at 11:08 PM
Yes the Cliffnet Wizard for G5 is backwards compatible to G4. If you guys need a copy of it. send a private e-mail to savage99_99@yahoo.com------------- Tommy
-Clifford/Directed/Alpine-Audio & Security-
New York Installer 
Posted By: nighthawk2k
Date Posted: June 06, 2003 at 12:06 PM
I hope everyone who sent me an e-mail got the clifford software. ------------- Tommy
-Clifford/Directed/Alpine-Audio & Security-
New York Installer
Posted By: robHI
Date Posted: June 06, 2003 at 2:30 PM
nighthawk2k wrote:
I hope everyone who sent me an e-mail got the clifford software.
thank you
Posted By: nighthawk2k
Date Posted: July 04, 2003 at 8:29 AM
New Version For Clifford Cliffnet Pro 2.10 ------------- Tommy
-Clifford/Directed/Alpine-Audio & Security-
New York Installer
Posted By: 80085
Date Posted: July 04, 2003 at 12:56 PM
hey nighthawk, can i get a copy? joel.ong@bell.ca
Posted By: rudbwoy69camaro
Date Posted: July 04, 2003 at 3:20 PM
nighthawk2k, you say "New Version For Clifford Cliffnet Pro 2.10" Is there any difference between that and the 2.00 version? 
-------------
Posted By: nighthawk2k
Date Posted: July 06, 2003 at 12:36 PM
The 2.10 version is truely ready for the G5 technology. the beta version didn't have it setup yet. ------------- Tommy
-Clifford/Directed/Alpine-Audio & Security-
New York Installer
Posted By: BIGPLC
Date Posted: July 06, 2003 at 7:05 PM
can i get a copy please notorious_plc@hotmail.com
Posted By: bigfootxxx3
Date Posted: July 14, 2003 at 11:12 AM
clifford pro version 2.1 is down loadable here https://www.clifford.de/ ------------- ALL PRO ALL THE TIME
Posted By: rudbwoy69camaro
Date Posted: July 14, 2003 at 5:57 PM
let's get to the software...shall we. faster link here: https://www.directed.de/guides/software.asp -------------
|