Print Page | Close Window

1999 dodge ram 2500

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23451
Printed Date: July 21, 2025 at 10:40 PM


Topic: 1999 dodge ram 2500

Posted By: Julio Martinez
Subject: 1999 dodge ram 2500
Date Posted: December 27, 2003 at 5:48 PM

I have a mega 3600 alarm, and i'am having problems with the remote starter installation. Does Any doddy have any idea?




Replies:

Posted By: Teken
Date Posted: December 27, 2003 at 5:57 PM
Would that be a Omega system? And what exactly is the problem you are having?


Regards

EVIL Teken . . .



Posted By: Julio Martinez
Date Posted: December 27, 2003 at 6:05 PM

Is not a omega system, It is a MEGALARM (Mega 3600) Remote Engiene Starter With Pager Alarm System.




Posted By: Teken
Date Posted: December 27, 2003 at 6:24 PM
And your problem is what, exactly as it pertains to the RS portion of the unit?posted_image



Posted By: Julio Martinez
Date Posted: December 27, 2003 at 6:27 PM
I canot get the remote starter to work.



Posted By: Teken
Date Posted: December 27, 2003 at 6:32 PM
Julio Martinez wrote:
I canot get the remote starter to work.



1. RS lights up the side marker lights, and you hear it prime the engine. Then the RS shuts off.


2. RS engages the starter, then shuts off.


3. RS enagages the starter, over cranks, under cranks, then shuts off.


4. RS starts the vehicle and runs for awhile, then shuts off.


5. RS does absolutely nothing. No lights, priming, cranking. Just dead.



Pick one . . .



Posted By: Julio Martinez
Date Posted: December 27, 2003 at 7:05 PM

5. RS does absolutely nothing. No lights,priming, crancking. JUST

DEAD. From: Julio




Posted By: Teken
Date Posted: December 27, 2003 at 7:30 PM
So at what part of the installation process are you on?



Posted By: Julio Martinez
Date Posted: December 27, 2003 at 9:37 PM
I'am finish. All other thins work but the RS. Julio



Posted By: Teken
Date Posted: December 27, 2003 at 11:03 PM
Do you have the tach source connected, and programmed as per the manual?


Print Page | Close Window