2000 Honda Odyssey remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23575
Printed Date: May 28, 2024 at 6:34 PM
Topic: 2000 Honda Odyssey remote start
Posted By: michaeltam2k
Subject: 2000 Honda Odyssey remote start
Date Posted: December 29, 2003 at 9:41 PM
I have install my viper 550 esp on my 2000Honda Odyssey.but it doesn't start but everything works .does anybody know what am I missing ? how do i connect this -- WHITE/ blue(-)remote start avtivation input ? thank you so much..
Replies:
Posted By: ck auto
Date Posted: December 29, 2003 at 9:53 PM
hi does it crank or does the ign sequence fire up do you have the neutral safety wire hooked up ------------- good luck
kirk
Posted By: michaeltam2k
Date Posted: December 29, 2003 at 10:06 PM
it doesn't do anything and yes i did hook the safety wire but my car has imbolizer do i need to wrap a key to the ignition and wich wire color on the alarm and to the car .thank you
Posted By: michaeltam2k
Date Posted: December 29, 2003 at 10:07 PM
Anyone please help on 2000 honda odyssey where is the tachometer for this car and what color please ...thank you so much
Posted By: ck auto
Date Posted: December 29, 2003 at 10:09 PM
hi its blue at test connector above master cylinder
------------- good luck
kirk
Posted By: profuse007
Date Posted: December 29, 2003 at 10:10 PM
| TACHOMETER|blue | |above the brake master cylinder *2 |
*2 In a 2-pin test connector. the connector maybe taped and you may notice a loop at the connector.
------------- Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: ck auto
Date Posted: December 29, 2003 at 10:13 PM
will it remote start with key in ing and what did you hoiok the neutral safety wire to
------------- good luck
kirk
Posted By: michaeltam2k
Date Posted: December 29, 2003 at 10:19 PM
to the lt green / red
Posted By: ck auto
Date Posted: December 29, 2003 at 10:20 PM
does this wire show a continious ground when it is in neutral also is your hood pin lined up proplerly
------------- good luck
kirk
Posted By: michaeltam2k
Date Posted: December 29, 2003 at 10:22 PM
Posted By: ck auto
Date Posted: December 29, 2003 at 10:24 PM
what about the hood pin test at rs harnessmake suretherer isn't ground there when hood closed what have you done as far as trouble shooting rs
------------- good luck
kirk
Posted By: ck auto
Date Posted: December 29, 2003 at 10:25 PM
what about the hood pin test at rs harnessmake suretherer isn't ground there when hood closed what have you done as far as trouble shooting rs do your lights flash when you press lock and unlock
------------- good luck
kirk
Posted By: profuse007
Date Posted: December 29, 2003 at 10:25 PM
the WHITE/ blue(12pin harness) and neutral must see ground
------------- Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: ck auto
Date Posted: December 29, 2003 at 10:30 PM
if you gruind the white\blue it will rs this wire is to trigger off another source like push button or othew remote ------------- good luck
kirk
Posted By: michaeltam2k
Date Posted: December 29, 2003 at 11:31 PM
H1/3 WHITE/ blue---------------(-) remote start activation input H2/2 light GREEN/ black------(-) factory disarm output H3/1 blue----------------------(-) 200 mA status/factory re-arm output H3/2 blue/black--------------(-) 200 mA optional third ignition output H3/4 brown-------------------(+) brake shutdown H3/5 violet/white------------tachometer input H3/6 BLACK/ white-----------(-) neutral safety switch input On my 2000 honda odyssey , please help me where and how to connect these wire to my car cause my car wont start .....thank you so much
Posted By: black2nd12
Date Posted: December 29, 2003 at 11:36 PM
brake shutdown - WHITE/ black wire at brake pedal tach should be a blue wire at the master cylinder under the hood the other wires depend on what alarm you are interfacing with. i hope this helps.
Posted By: michaeltam2k
Date Posted: December 29, 2003 at 11:39 PM
i am using viper 550 esp
Posted By: black2nd12
Date Posted: December 29, 2003 at 11:52 PM
you need an immobilizer bypass module. most all of the new hondas have an immobilizer installed on them from the factory. you can try dei's 555u module. at least i think thats the model number for it. it will allow you to bypass the factory system and start your vehicle. thats what the other wires are going to connect to.
Posted By: michaeltam2k
Date Posted: December 30, 2003 at 12:03 AM
please help me find the wiring diagram for my 2000 honda odyssey thank you
Posted By: boomer_106
Date Posted: December 30, 2003 at 12:40 AM
Michael its right here on this site my friend. Here is the link. 2000 Honda Odyssey Alarm Information
|