Print Page | Close Window

ultrastart as2250 in 2000 silverado

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23626
Printed Date: May 28, 2024 at 4:59 AM


Topic: ultrastart as2250 in 2000 silverado

Posted By: plunatic
Subject: ultrastart as2250 in 2000 silverado
Date Posted: December 30, 2003 at 2:53 PM

I have just installed an ultrastart as2250 in a 2000 silverado.  Everything is working except keyless.  I am getting nothing from my lock unlock wires. I just wanted someone to talk me through where the lock unlock wires should go just to make sure I did it right.



Replies:

Posted By: draasch
Date Posted: December 30, 2003 at 5:03 PM
Power Lock L BLUE HIGH IN DRIVERS #203
Power Unlock WHITE KICK PANEL #202

#202 - See Positive Pulse Door Lock Diagram. (2 Door w/Keyless or 4 Door) #203 - See Reversal Rest At Ground Door Lock Diagram. (2 Door w/o Keyless)


what is the output on the alarm??????
i think they are neg.....look at the info above and see which one applies to you....drop a line back if you cant work it out..................

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt




Posted By: plunatic
Date Posted: December 31, 2003 at 7:30 AM
yes the outputs are neg.



Posted By: boomer_106
Date Posted: December 31, 2003 at 12:20 PM

Then you'll need to reverse the polarity with a relay. You didnt mention if it had factory keyless or not. If not you will have to do the reversal rest at ground wiring. I think there is a diagram here showing that.

https://www.the12volt.com/doorlocks/doorlocks.asp


Print Page | Close Window