Print Page | Close Window

04 dodge ram door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23643
Printed Date: May 15, 2025 at 9:11 AM


Topic: 04 dodge ram door locks

Posted By: vetteluvr33
Subject: 04 dodge ram door locks
Date Posted: December 30, 2003 at 7:27 PM

hey guys, i am installing a command start in a 04 ram, the wire is a purple with a dark green stripe, i have located it, and i have put the resistors in line with the rs to trigger the locks. my problem is if i hook up both the unlock and lock to the prpl/grn wire then none of the locks work, but if i hook up just one or the other, they work fine, now i have tried cutting the wire in half but then nothing works, if i use relays to trigger them, will this fix my problem, any help would be great. oh yeah, the rs i am using sends a negative pulse for the locks if that helps any.

  thanks k




Replies:

Posted By: serialthrlla
Date Posted: December 30, 2003 at 7:56 PM
you'll need relays.After you put the resistor in the lockwires from the remote start, your signal will not be strong enough for the locks to function properly


Print Page | Close Window