Print Page | Close Window

2001 Accord Progressive Lock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23650
Printed Date: July 12, 2025 at 7:55 PM


Topic: 2001 Accord Progressive Lock

Posted By: Pjaccord
Subject: 2001 Accord Progressive Lock
Date Posted: December 30, 2003 at 10:13 PM

I'm in the middle of ripping out the "factory upgrade" alarm dealt to me by my fine dealer.  It's an automate 415 with such a clean install that I can see the brain to the alarm in plain sight, they have the arm and diarm wires going to the factory RKE box with a factory lock and unlock wires cut with a diode inline.  It's finally gotten on my nerves so I'm ripping it out and installing a viper 791xv.  With the help of this forum I've found pretty much every wire I need except one.

Would anyone happen to know the wire for drivers side door unlock only?  It's currently has progressive unlock and that's a feature I'd like to try and keep.  The unlock wire listed here is for all of the door.   Seeing as it's already there, I'd hate to have to cut the lock wires and do it the old fashioned way. 

I appreciate any help that can be given.




Replies:

Posted By: profuse007
Date Posted: December 30, 2003 at 10:57 PM
check this thread

theres a diagram shows the driver motor

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).


Print Page | Close Window