Locks on a taurus

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=2366
Printed Date: July 17, 2025 at 5:49 PM

Topic: Locks on a taurus

Posted By: markb
Subject: Locks on a taurus
Date Posted: July 30, 2002 at 12:13 PM

I'm about to install a remote statrter on a 97 Taurus, and I was wondering about the lock/unlock system. My wiring chart says they are negative wires. Am I going to need to pulse these with a certain resistance to ground or just straight to ground? Also, has anyone ever made their own coils around the key and ign. barrel for their transponder bypass?

Thanks

-------------
-Mark

Replies:

Posted By: Velocity Motors
Date Posted: July 30, 2002 at 12:27 PM

Just hook up the lock and unlock wires from the alarm and it should do the rest. If you have to program the outputs of the locks then do so, otherwise all RS systems have a (-) ground output signal for the keyless entry. I will email you instructions for the single relay bypass.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: Velocity Motors
Date Posted: July 30, 2002 at 12:28 PM

Your email does not work. Came back as an error. Is there another email I can send you this information ??

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: markb
Date Posted: July 30, 2002 at 12:32 PM

Yes, I just updated my profile, I forgot I switched adresses a long time ago, and didn't update. The new one is mbuster@connectingyou.com sorry.

Thanks for the help

-------------
-Mark

Print Page | Close Window