Print Page | Close Window

03 Cavalier remote start, problems

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23691
Printed Date: May 04, 2024 at 8:46 AM


Topic: 03 Cavalier remote start, problems

Posted By: securinu
Subject: 03 Cavalier remote start, problems
Date Posted: December 31, 2003 at 8:55 PM

I installed a remote start today on a 2003 chevy Cavalier and now when you remote start the theft system light and service light (wrench logo) stay on only when you remote start . when you start with the key they dont stay on.  I used the PLDATA to bypass the passlock. I am stumped on this one I dont do alot of GM product so maybe someone can give me a heads up . TIA

-------------
Joe O'Byrne
Owner / Installer



Replies:

Posted By: ck auto
Date Posted: December 31, 2003 at 9:19 PM

what wires did you connect to for rs and security



-------------
good luck
kirk



Posted By: securinu
Date Posted: January 01, 2004 at 2:13 PM

red , pink, orange,brown  for main harness and yellow for start.

the problem is when using remote to start  the lights stay on but if you use the pitstop feature they dont . Could this be a keysense issue???



-------------
Joe O'Byrne
Owner / Installer



Posted By: profuse007
Date Posted: January 01, 2004 at 2:43 PM
i know on ford truck that i installed recently, when didnt power the 2nd ign or 2nd acc (couldnt remember)the thief light comes on when remote start.

dont know if that will be helpful but just a look out. besure all the connections: accs,igns

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).



Posted By: japanime83
Date Posted: January 01, 2004 at 5:01 PM

did you diode isolate your connections this will bypass the lights thats if you can find the wire thow....

I did it in my truck an the theft light stoped blinking when it was remote started!

-kitt




Posted By: securinu
Date Posted: January 01, 2004 at 5:27 PM
diode isolate which connections??? 

-------------
Joe O'Byrne
Owner / Installer


Print Page | Close Window