Print Page | Close Window

1999 Mercury Sable Door Locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23719
Printed Date: July 19, 2025 at 4:03 AM


Topic: 1999 Mercury Sable Door Locks

Posted By: japanime83
Subject: 1999 Mercury Sable Door Locks
Date Posted: January 01, 2004 at 4:55 PM

Ok I have a small problem an I hope somone can help!!!

Car: Mercury Sable 1999

Problem: Door Locks

power lock: (-) negative

power unlock: (+) positive

The problem is that the alarm (Valet, Model 563T "Manul can be found here: https://www.directed.com/guides/manuals/ig/valet/N563T_6-03.pdf ) has two wires in th "door lock harness, 3-pin connector" (located on pg. 15 in the manual) 1-green an 1-blue.

the   Green is    (-) lock  (+) unlock output    and     Blue is  (+) lock   (-) unlock  output

but as I stated above the 2-wires need to see (-) in order to do thier seperate jobs.

example: to lock the power lock wire needs to see (-)    to unlock it needs to see (-)

so does the alarm just send a negative on both wires or does it send a (-) to 1 an a (+) to the other

if so how do i correct it to be negative only!

thanks in advance!!!!!!!!!!!!!!,

kitt   




Replies:

Posted By: ck auto
Date Posted: January 01, 2004 at 6:46 PM
hi just hook them up  as you need them green lock and blue unlock don't worry about the + because the locks rest a 12v

-------------
good luck
kirk



Posted By: japanime83
Date Posted: January 01, 2004 at 7:01 PM
thanks alot kirk!!!!!!




Print Page | Close Window