Alarm Diagram for 2000 328ci

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23756
Printed Date: May 22, 2024 at 7:57 PM

Topic: Alarm Diagram for 2000 328ci

Posted By: carguy411
Subject: Alarm Diagram for 2000 328ci
Date Posted: January 02, 2004 at 12:41 AM

anyone have the diagram for the 2000 BMW 328ci
i neeed all the alarm info you can possibly give me.is it a pain to install a basic alarm on it???also he has the remote for the factory keyless built into the key is tha a problem. and after the alarm is put it can he still use the trunk pop on that key to open it so i can use the aux cannels on the alarm for something else?
sorry for all the questions just wantto make sure
thanks

Replies:

Posted By: japanime83
Date Posted: January 02, 2004 at 12:46 AM

I have installed a clifford in the exact same BMW alls I can say is take your time.....

As for the trunk pop question yesshe can still use the trunk pop, but tell him not to try an disable the factory alarm with the key anymore.

-kitt

Posted By: boomer_106
Date Posted: January 02, 2004 at 12:48 AM

I believe this is what your looking for. 2000 BMW 3 Series Alarm Information Ive never worked with a bmw so I cant help ya there. As far as using the key to pop the trunk Id say if it works now and you dont cut the wiring in half it should work after the install as well.

Posted By: carguy411
Date Posted: January 02, 2004 at 10:54 AM

ok kool so all i have to do is just disarm the alarm first before poping the trunk and it should still b e fine..also you ever do a remote start in here .there a pain cause u have to bypass the security right??

Posted By: carguy411
Date Posted: January 03, 2004 at 10:31 AM

ok i just found out that the car is pre wired for a BMW security system. does tha mean there is a plug i can tap into so i can get my connections in all one place???
thanks

Posted By: carguy411
Date Posted: January 05, 2004 at 12:56 AM

sorry to be a apin but im doing the alarm this week and want to make sure
some one had mentiond that for the prewired bmw the plug for all the alarm conections is all in one spot but im not to sure aand i also read that if u have an extedned pule going to the lock wire it will close the windows and sunroof is that true how would u do that
thanks