I just got a prostart CT-5000 for my 2003 Dodge Ram. I have been doing the research on the install and have determined that I need allot more than came in the box. I have all the diagrams and pics, but they do not list diode # Ect. Apparently my truck has a security system built in already. So here is my problem. Can anyone give me a list of parts that are required to do this installation? I live in a remote location and I don’t have access to many recourses. Where can I order this?
Resister sizes (1/4 watt?), Diode #, Relay, and this by-pass module for my truck.
Any help in this matter would be appreciated.
-------------
If it is not broke, make it better.
hi the diagram is at this link as well as most of the info you need
https://www.the12volt.com/installbay/forum_posts.asp?tid=22991&KW=dodge+ram-------------
good luck
kirk
Is your key grey? If so, a 555C from DEI will bypass the transponder key. If its black, you have nothing to worry about.
Do you have the factory alarm? A majority of the 02-04 Rams I have seen don't have it. Roll down window, lock truck with remote, wait 1 minute, reach in window and open door. If alarm sounds....you have it. Whether or not you have the alarm will determine resistor values needed.
Another thing....anyone have a link to a Prostart install manual? I've seen that brand mentioned here a lot lately and would like to check them out.
thanks for the advice. here is their website: https://206.47.191.115/prostart.nsf/en/Prostart
i do have a grey key, power locks but no keyless entry and this is a 4 door truck so i don't know about a factory security system.
-------------
If it is not broke, make it better.