Print Page | Close Window

Crimestopper Rs-900 VI No remote response

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=23898
Printed Date: May 16, 2024 at 3:14 AM


Topic: Crimestopper Rs-900 VI No remote response

Posted By: climbchild
Subject: Crimestopper Rs-900 VI No remote response
Date Posted: January 04, 2004 at 10:16 AM

Need some help.  Installed a brand new CS RS-900 VI on a 1990 Ford Bronco.  All appears well, but cannot get the unit to fire the starter.  Its like there is no response from the remotes.  I am wondering if there is a way to make the unit fire without the remotes so I can at least test the wiring I've done?  Any ideas on the remotes?  I've done all the trouble-shooting that the book suggests.  All the programming and learning functions work, but no remote input.  The only thing that is even a it sketchy is when I do the tach finder, the lights sometimes miss a beat when they are flashing their response.  Any help?  Thanks in advance guys....



Replies:

Posted By: lspker
Date Posted: January 04, 2004 at 8:18 PM
The 900 series can be put into "start" mode, see your manual for the no remote or use the factory (door lock) intereface ground pulse to trigger.





Print Page | Close Window